Surjeet Logo
SURJEET.COM.NP
Loading page...
PLEASE WAIT 100%
Your One-Stop

Educational
Resource Hub

Free notes, model questions, past papers, and educational news for SEE, Class 11 & 12, D.Com (Computer Engineering) and Diploma Civil Engineering.

100%
Free
Study Materials
Educational Resource Hub Logo

Engineering Chemistry—II (Engg. All) ( 2076 ) Question Paper Solution

Engineering Chemistry—II (Engg. All) 2nd Sem

( 2076 ) Question Paper Solution
1. a) What do you mean by hardness of water ? Describe the permutit method of hardness of water ?

➤ The hardness of water is due to the presence of soluble bicarbonates, chlorides and sulfates of calcium and magnesium.

Permutit Process

➤ Permutit is a complex compound known as hydrated sodium aluminium silicate, Na2Al2Si2O8 × H2O. Sodium ion of this compound is exchanged by Ca++ and Mg++ ions of hard water and cause the precipitation of calcium and magnesium aluminium silicates in the form of zeolite. Soluble NaCl and Na2SO4 are separated by distillation process.

CaCl2 + Na2Z → CaZ ↓ + 2NaCl
MgSO4 + Na2Z → MgZ ↓ + Na2SO4

where, Z = Al2Si2O8 × H2O.

After sometime, the whole of the Na2Al2Si2O8 gets changed into calcium and magnesium zeolites and the sodium ions are regenerated by adding 10% NaCl solution to continue the reaction.

CaZ + 2NaCl → Na2Z + CaCl2
MgZ + 2NaCl → Na2Z + MgCl2
Fig:- Permutit Process.
b) Describe the manufacture process of nitric acid with it's principle and well labeled diagram.
❖ Principle
  1. Ammonia is oxidized to nitric oxide in presence of air at 800°C over the catalyst platinum gauze or a rhodium-platinum alloy.
    4NH3 + 5O2 Δ/Pt/Rh➔ 4NO + 6H2O + Heat
  2. Nitric oxide formed is cooled and allowed to come into contact with air and it gets oxidized to nitrogen dioxide.
    2NO + O2 → 2NO2
  3. Nitric acid is obtained when nitrogen dioxide is dissolved in water in presence of air.
    4NO2 + 2H2O + O2 → 4HNO3
Working Process
Ostwald process for manufacture of nitric acid
Figure :- Ostwald's process for manufacture of nitric acid.

The mixture of ammonia and air is passed to converter which contains platinum gauge at 800°C and here NH3 is oxidized to nitric oxide. This nitric oxide is passed to oxidation chamber through cooler where it oxidizes to nitrogen dioxide. The nitrogen dioxides from oxidation tower are passed through absorption tower which is packed with acid-proof stone or quartz. The nitrogen dioxide comes into contact with water and air and gets dissolved to form nitric acid which is collected at the foot of the tower in the receiver.

2. a) Define allotrophs of carbon? Explain the structure of Diamond and Graphite.

➤ The two or more forms of the Carbon having same chemical properties but different physical properties are called allotropes of carbon.

❖ Structure of Diamond

➤ It is a crystalline allotropes of carbon in which each carbon atom is combined with other four carbon atoms tetrahedrally having an angle of 109°, 28' and bond length of 1.54 Å. As there is strong covalent bond, it is considered as hardiest substance. It is considered to be the purest form of carbon and is believed to be formed when very high pressure develops on coal beds in the earth. As there are no electrons, it is bad- conductor of heat and electricity.

Structure of Diamond
Fig:- Structure of Diamond.
❖ Structure of Graphite

➤ In graphite each carbon atom is bonded with other three carbon atoms by a covalent bond forming an angle of 120° having bond length 1.42 Å. The slippery and soft nature of graphite is due to the presence of weak Vander Waal's force of attraction which is acting between the different layers of carbon hexagonally. As there is a presence of one electron free from each carbon atom and which are free to move. The structure of graphite is shown below.

Structure of Graphite
Fig:- Structure of Graphite.
b) How does hydrochloric acid is prepared in the laboratory? Explain, the properties of hydrochloric acid.

➤ In the laboratory, hydrogen chloride gas is prepared by heating sodium chloride with concentrated sulphuric acid.

NaCl + H2SO4 → NaHSO4 + HCl (On gentle heating)
NaHSO4 + NaCl → Na2SO4 + HCl (On Strong heating)

Here, sodium chloride is taken a powdered form in a round bottomed flask fitted with a dropping funnel and delivery tube. Conc. H2SO4 is poured in sufficient quantity so that salt is covered. At first, HCl and sodium hydrogen sulphate are formed and at red heat normal sodium sulphate and more HCl is formed.

Laboratory preparation of HCl gas
Fig :- Laboratory preparation of HCl gas.

Hydrogen chloride gas is highly soluble in water. So, to prepare HCl solution care must be taken to see that the water is not sucked back into the generating flask. To avoid that, an anti-suction device is made by connecting an inverted funnel to the delivery tube with rubber tubing to the stem of the funnel dipped just under the surface of water in a beaker.

In this way after adjusting all apparatus HCl gas is passed into water which then forms aqueous hydrochloric acid.

Preparation of hydrochloric acid solution
Fig:- Preparation of hydrochloric acid solution.
➤ The Properties of Hydrochloric acid :-
▪ Physical Properties
  1. It is a colourless pungent smelling gas.
  2. It is extremely soluble in water giving strong acidic solution. It is highly ionized in aqueous solution.
  3. HCl gas can be liquefied to a colourless liquid (b.pt. -83°C) and frozen to a white crystalline solid (m. pt.-114°C).
▪ Chemical Properties
  1. Combustibility: Hydrogen chloride is neither combustible nor supporter of combustion.
  2. Acidic nature: HCl react with sodium hydroxide to give sodium salt and water.
NaOH + HCl → NaCl + H2O
3. a) Explain the dehydrating and oxidizing properties of sulphuric acid.
➤ Sulphuric acid as dehydrating agent :-
  • Oxalic acid is react in the presence of conc. H2SO4 then, carbon dioxide and carbon monoxide is formed.
    (COOH)2 Conc. H2SO4➔ CO2 + CO + H2O
  • Formic acid is react in the presence of conc. H2SO4 then, carbon monoxide is formed.
    HCOOH Conc. H2SO4➔ CO + H2O
➤ Sulphuric acid as oxidizing agent :-
  • Metals are oxidized to their oxides, which then form sulphates.
    H2SO4 → H2O + SO2 + [O]
    Cu + [O] → CuO
    CuO + H2SO4 → CuSO4 + H2O

    Cu + 2H2SO4 → CuSO4 + 2H2O + SO2

Similarly,

Some metals like iron, zinc, etc react with dilute acid to liberate hydrogen, hence oxidized.

Fe + H2SO4 → FeSO4 + H2
Zn + H2SO4 → ZnSO4 + H2
b) What do you mean by acid rain? Mention the types of chemical fertilizer with its features (Characteristics).

➤ The Large amount of oxides of nitrogen and sulphur are evolved into the atmosphere from the industries, automobiles, oil refiners etc. which dissolve in rain water to give different acids like H2SO4, H2SO3, HNO3 etc are called acid rain.

➤ The types of Chemical fertilizer are listed below:-
  • Nitrogen fertilizers:
    (NH4)2SO4 : Ammonium sulphate
    CAN : Calcium ammonium nitrate
    NH2CONH2 : Urea
  • Phosphorus fertilizers:
    Ca(H2PO4)2 · H2O : Super phosphate of lime
  • Potash fertilizer:
    KNO3 : Potassium nitrate
    K2SO4 : Potassium sulphate
➤ Its features (characteristics) are listed below :-
  • Fertilizer must be stable.
  • It must be freely soluble in water.
  • The fertilizer should have no harm to plants.
  • It should have good storage property.
4. a) What are the characteristics of alkali metals? Explain the properties of sodium?
➤ The characteristics of alkali metals are listed below :-
  • They are strongly reducing agents as they give electrons very easily.
  • They are soft as compared with other metals.
  • They have low melting points.
  • They are very reactive so they are found in combined state.
  • These metals act vigorously with water, oxygen and chlorine.
  • They have very low ionization potential with bigger atomic size in their respective period.
  • They possess +1 oxidation state.
  • They are highly electropositive in their respective period.
➤ The properties of sodium are listed below :-
  • Sodium is a silvery white soft solid and can be cut with a knife.
  • It is less dense than water.
  • The density of sodium is 0.97 g/cm3.
  • It is good conductor of heat and electricity.
  • Sodium acts as a powerful reducing agent. It reduces silicon dioxide to silicon.
    4Na + SiO2 → 2Na2O + Si
  • Sodium violently reacts with water giving sodium hydroxide and hydrogen.
    2Na + 2H2O → 2NaOH + H2
  • Sodium combines with halogen to form sodium halides, which are ionic crystalline solids.
    2Na + Cl2 → 2NaCl
b) What are the characteristics of aromatic compounds? Explain the chemical properties of benzene?
➤ The characteristics of aromatic compounds are :-
  • Aromatic compounds are planar molecules.
  • They produce induce ring current.
  • They produce sooty flame on burning.
  • The percentage of carbon is higher in aromatic compounds as compared to the aliphatic compounds.
➤ The chemical properties of benzene are :-
  • Sulphonation :- Benzene on heating with fuming sulphuric acid (concentrated sulphuric acid containing some dissolved SO3) undergoes sulphonation forming benzenesulphonic acid.
    Sulphonation Reaction Diagram
  • Nitration :- It is carried out by heating benzene with a mixture of concentrated nitric acid and sulphuric acid (nitrating mixture) to 50-60°C.
    Nitration Reaction Diagram
5. Write short notes on: (Any Five)
a) Aqua-regia

➤ A mixture containing one part of conc. HNO3 and three part of conc. HCl is Called aqua-regia (Kingly Water). It is able to dissolve noble metal like gold, Platinum, etc because nascent chlorine is generated.

HNO3 + 3HCl → NOCl + 2H2O + 2[Cl]
Au + 3[Cl] → AuCl3
Pt + 4[Cl] → PtCl4
b) Bleaching action

➤ The process of removal of colour from coloured matter is called bleaching. In the presence of moisture, chlorine bleaches vegetable colouring matters by oxidizing them into colourless matters.

Cl2 + H2O → 2HCl + [O]
Vegetable colouring matter + [O] Oxidation➔ Oxidized colourless matter

Bleaching by chlorine is permanent, i.e., bleached substances cannot restore their original colour on standing. This is because of the fact that chlorine bleaches, the substances by oxidizing them into colourless substances and no any reducing agent is present in the atmosphere.

c) Functional group

➤ Functional group is an atom or radical which determines the characteristics of homologous series as well as that of homologues. Each class of the compound possess a similar properties which is because of the presence of particular group of atoms like –COOH, –CHO, etc.

For E.g.: all the aldehydes have –CHO as functional group.

d) Polyethene

➤ It is an addition polymer of ethylene monomers. It is obtained by two varieties viz. low density polythene (LPD) and High density polythene (HPD).

Low density polythene can be produced by heating at about 250°C and applying 1500 atmospheric pressure in the presence of trace amount of oxygen.

nCH2 = CH2 1500 atm / 250°C➔ (—CH2 — CH2—)n

High density polythene is produced at relatively lower temperature (50-75°C) and lower atmospheric pressure (6.7 atm.) in the presence of triethyl aluminium [Al(C2H5)3] and titanium tetrachloride [Ti(Cl)4] as the catalyst.

e) Alkaline earth metals

➤ The metals of group II A of the periodic table are called alkaline earth metals. All the alkaline earth metals have two electrons in the valance shell. They have strong tendency to lose the s electrons and thus show strong electropositive character.

Oxides of calcium, barium, strontium are called 'Earth' in early days because they occur in earth crust and remain unchanged even after strong heating. Afterwards, it was found that the so called earth is soluble to some extent in water, and the solution is alkaline to litmus. Thereafter, it was named as alkaline earth and the metals as alkaline earth metals.

Alkaline earth metals are:- Be, Mg, Ca, Sr, Ba, Ra.

f) Homologous series

➤ A series obtained by placing the member of organic compound of same functional group from lower to higher is called homologous series and this phenomenon is known as homology.

E.g :–

  • CH3 — OH : Methanol
  • CH3 — CH2 — OH : Ethanol
  • CH3 — CH2 — CH2 — OH : Propanol
  • CH3 — CH2 — CH2 — CH2 — OH : Butanol
  • CH3 — CH2 — CH2 — CH2 — CH2 — OH : Pentanol
6. What happen when: (Any Five)
a) Ammonia gas is passed on concentrated hydrochloric acid?

➤ Ammonia gas is passed on conc. HCl Then, ammonium chloride is formed.

NH3(g) + conc. HCl → NH4Cl
b) Concentrated HCl and concentrated HNO3 is mixed in 3:1 ratio.

➤ When Conc HCl and HNO3 is mixed is the ratio 3:1 Then, Aqua-regia is formed.

3HCl + HNO3 → NOCl + 2H2O + 2[Cl]
c) Benzene is treated with (methyl chloride) helpful chemical presence of Anhydrous AlCl3 and ether.

➤ When benzene is treated with methyl chloride in the presence of anhydrous AlCl3, methylbenzene (toluene) is formed.

Toluene Reaction Diagram
d) Calcium metal is allowed to react with water molecule.

➤ Calcium metal is react with water molecule to form Ca(OH)2 & H2 gas.

Ca(s) + 2H2O → Ca(OH)2(aq) + H2 (↑)
e) Ammonia is passed over excess of chlorine.

➤ Ammonia is passed over excess of chlorine Then, NCl3 and HCl is formed.

NH3 + 3Cl2(excess) → NCl3 + 3HCl
(Nitrogen trichloride)
f) Iron rod is immersed into copper sulphate solution.

➤ When iron rod is immersed into copper sulphate solution following reaction takes place.

Fe(s) + CuSO4(aq) → FeSO4(aq) + Cu(s)

Note:- This reaction shows Iron is more reactive than copper because, it displaces copper from the copper sulphate solution.

SURJEET.com.np

Post a Comment

Previous Post Next Post